model

HDR-150-12

HDR-150-15

HDR-150-24

HDR-150-48

output

DC voltage

12V

15V

24V

48V

Rated current

115VAC

10.2A

8.55A

5.31A

2.72A

230VAC

11.3A

9.5A

6.25A

3.2A

Rated power

115VAC

122.4W

128.3W

127.4W

130.6W

230VAC

135.6W

142.5W

150W

153.6W

Ripple and Noise (Max) Note 2

100mVp-p

120mVp-p

150mVp-p

200mVp-p

Voltage adjustment range

10.8~13.8V

13.5 ~ 18V

21.6 ~ 29V

43.2~55.2V

Voltage accuracy note 3

±2.0%

±1.0%

±1.0%

±1.0%

Linear adjustment rate

±1.0%

±1.0%

±1.0%

±1.0%

load regulation

±1.0%

±1.0%

±1.0%

±1.0%

Start-up and rise time

500ms, 60ms/230VAC 500ms, 60ms/115VAC (at full load)

Hold time(Typ.)

30ms/230VAC 12ms/115VAC (at full load)

enter

voltage range

85 ~ 264VAC (277VAC available) 120 ~ 370VDC (390VDC available)

frequency range

47 ~ 63Hz

Efficiency(Typ.)

0.89

0.895

0.905

0.905

AC current(Typ.)

3A/115VAC??????1.6A/230VAC

Inrush current(Typ.)

Cold start 35A/115VAC 70A/230VAC

Protect

overload

105 ~ 135% rated output power

When the output voltage is

The output voltage is in constant current mode at 50% ~ 100%, and can automatically recover after the abnormal load condition is removed.

Overvoltage

14.2~16.2V

18.8 ~ 22.5V

30~36V

56.5 ~ 64.8V

Protection mode: shut down the output and can be restored after the power is restarted

environment

working temperature

-30 ~ +70℃ (please refer to "Derating Curve")

Working humidity

20 ~ 90% RH non-condensing

Storage temperature and humidity

-40 ~ +85℃, 10 ~ 95% RH non-condensing

temperature coefficient

±0.03%/℃ (0 ~ 45℃) RH non-condensing

Vibration resistant

10 ~ 500Hz, 2G 10 minutes/cycle, X, Y, Z each 60 minutes; installation: in line with IEC60068-2-6

Operating altitude

2000 meters (note 4)

Overvoltage level

Ⅲ;According to EN62368, EN61558, EN50178, EN60664-1, EN62477-1; Altitude up to 2000 meters

safety regulations and

electromagnetic

compatible

(Note 7)

safety regulations

IEC62368-1, UL62368-1, UL61010, TUV BS EN/EN61558-2-16, BS EN/EN61558-1, EACTPTC 004 certified;

Design reference BS EN/EN50178, TUV BS EN/EN62368-1

Pressure resistant

I/P-O/P:4KVAC

Insulation resistance

I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH

Electromagnetic compatibility emissions

Parameter

Standard

Test Level / Note

Conducted

BS EN/EN55032(CISPR32)

Class B

Radiated

BS EN/EN55032(CISPR32)

Class B?(note 5)

Harmonic Current?(Note 6 )

BS EN/EN61000-3-2

Class A

Voltage Flicker

BS EN/EN61000-3-3

-------

Electromagnetic compatibility immunity

BS EN/EN55024, BS EN/EN61000-6-2

Parameter

Standard

Test Level /Note

ESD

BS EN/EN61000-4-2

Level 3, 8KV air; Level 2, 4KV contact, criteria A

Radiated Susceptibility

BS EN/EN61000-4-3

Level 3, criteria A

EFT/Burest

BS EN/EN61000-4-4

Level 3, criteria A

Surge

BS EN/EN61000-4-5

Level 4,2KV/L-N, criteria A

Conducted

BS EN/EN61000-4-6

Level 3, criteria A

Magnetic Field

BS EN/EN61000-4-8

Level 4, criteria A

Voltage Dips and interruptions

BS EN/EN61000-4-11

>95% dip 0.5 periods, 30% dip 25 periods,

>95% interruptions 250 periods

other

MTBF

3046.3K hrs min. Telcordia SR-332 (Bellcore) ; 535.9K hrs min. MIL-HDBK-217F (25℃)

size

105*90*54.5mm (W*H*D)

Package

0.31Kg; 32pcs/11Kg/1.0CUFT

Remark

1. Unless otherwise specified, all specifications are measured at 230VAC input, rated load, and 25°C ambient temperature.

2. Ripple and noise measurement method: Use a 12" twisted pair cable with 0.1uf and 47uf capacitors connected in parallel at the terminal, and measure at 20MHZ bandwidth.

3. Accuracy: includes setting error, line regulation and load regulation.

4. Installation distance: When permanently loaded with full power, the recommended distance is 40mm at the top, 20mm at the bottom, and 5mm on both sides. If the adjacent device is a heat source, the recommended space distance is 15mm.

5. Output derating is required under low input voltage conditions. Please refer to the derating curve for details.

6. The power supply is considered as part of the system components and needs to be confirmed for electromagnetic compatibility in conjunction with the terminal equipment.

Guidelines for EMC test methods,

7. When the altitude exceeds 2000 meters (6500 feet), the ambient temperature of the fanless model decreases at a rate of 3.5℃/1000m, and the ambient temperature of the fan model decreases at a rate of 5℃/1000m.